This premium brass deep groove ball bearing offers superior corrosion resistance and electrical conductivity, ideal for environments where these properties are critical. Its robust design ensures smooth, low-friction operation in demanding power transmission systems.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 32mm |
| Outside Diameter | 162mm |
| Width | 27mm |
Engineered for reliability and performance, this brass deep groove ball bearing boasts an inside diameter of 32mm, an outside diameter of 162mm, and a width of 27mm. The inherent properties of brass, including its excellent thermal conductivity and non-sparking characteristics, make it suitable for specialized industrial applications. This bearing is designed to withstand moderate radial and axial loads, providing consistent rotational accuracy and extended operational life even under challenging conditions. Its precise manufacturing ensures minimal play and optimal load distribution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from contaminants. 2. Gently press or carefully tap the outer ring into the housing or the inner ring onto the shaft, ensuring even pressure. 3. Verify smooth rotation by hand after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Utilize a proper press or appropriate bearing installation tools, applying force only to the ring being seated. |
| Incorrect shaft or housing fit, resulting in premature wear or operational noise. | Adhere strictly to recommended shaft and housing tolerances for the specified bearing dimensions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||