This brass deep groove ball bearing is engineered for exceptional performance in challenging industrial applications. Its robust construction ensures reliable operation and extended service life under demanding conditions.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 27mm |
| Outside Diameter | 23mm |
| Width | 43mm |
Designed for demanding industrial environments, this deep groove ball bearing features a brass construction, offering superior corrosion resistance and non-sparking properties crucial for hazardous areas. With an inside diameter of 27mm, an outside diameter of 23mm, and a width of 43mm, it is specifically designed to accommodate axial and radial loads. The precision-machined raceways and high-quality balls ensure smooth, low-friction operation, minimizing energy loss and heat generation, making it ideal for continuous duty power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bore are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using a suitable press or arbor, applying force evenly on the outer ring or inner ring respectively. 3. Verify proper seating and smooth rotation after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force on the wrong ring during installation. | Always apply mounting force to the ring that is being fitted to the shaft or housing. Never apply force through the rolling elements. |
| Insufficient lubrication or use of incorrect lubricant. | Ensure the bearing is adequately lubricated with a high-quality grease or oil suitable for the operating temperature and load conditions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Conveyor Systems, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||