This high-performance deep groove ball bearing, constructed from premium brass, offers exceptional durability and corrosion resistance. Engineered for reliable power transmission in demanding environments, it ensures smooth rotational performance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 31mm |
| Outside Diameter | 151mm |
| Width | 20mm |
A high-performance industrial component, this deep groove ball bearing features an inside diameter of 31mm, an outside diameter of 151mm, and a width of 20mm. The solid brass construction provides superior corrosion resistance, excellent thermal conductivity, and good electrical insulation properties, making it ideal for environments where lubrication might be inconsistent or where non-sparking characteristics are beneficial. Its robust design ensures low friction and high load-carrying capacity, crucial for demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly to remove any debris or contaminants. 2. Carefully position the bearing onto the shaft, ensuring it is seated squarely. 3. Apply even pressure to the inner ring to press the bearing into its housing, avoiding impact loading on the cage or balls.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply mounting force exclusively to the inner ring when fitting the bearing onto the shaft. |
| Insufficient lubrication or contamination during installation. | Ensure both the bearing and its mating surfaces are properly lubricated and free from particulate contamination before and during installation. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motor Shafts, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||