This brass deep groove ball bearing offers superior corrosion resistance and excellent electrical conductivity. Engineered for smooth, low-friction rotation, it's ideal for applications where chemical exposure or non-magnetic properties are critical.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 30mm |
| Outside Diameter | 140mm |
| Width | 13mm |
A high-performance industrial component, this deep groove ball bearing is constructed from high-grade brass, providing exceptional resistance to corrosion and a non-magnetic nature. It features a precise 30mm inside diameter and a 140mm outside diameter, with a 13mm width, ensuring accurate load distribution and minimal play. The brass material offers good thermal conductivity, beneficial in environments with fluctuating temperatures. Its design allows for high rotational speeds and accommodates moderate radial and axial loads, making it suitable for a wide range of power transmission systems requiring reliability and longevity under challenging conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, ensuring it seats squarely and evenly. 3. Once the inner ring is firmly seated, press the outer ring into the housing, again ensuring a square and even fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when pressing onto the shaft. | Always apply force to the ring that is being fitted. For shaft mounting, force should be applied to the inner ring. |
| Improper lubrication leading to premature wear. | Use the manufacturer-recommended lubricant and apply it consistently according to the operating conditions and duty cycle. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Chemical processing equipment, Food and beverage machinery, Electrical motor shafts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||