This brass deep groove ball bearing offers superior corrosion resistance and excellent thermal conductivity. Its precise dimensions ensure smooth operation and reduced friction in demanding power transmission systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 37mm |
| Outside Diameter | 31mm |
| Width | 9mm |
Trusted by engineers across multiple sectors, this brass deep groove ball bearing (37mm ID x 31mm OD x 9mm Width) is meticulously manufactured for demanding power transmission applications. The inherent properties of brass, including its non-sparking characteristics and resistance to certain corrosive environments, make it an ideal choice where standard steel bearings might falter. Its robust construction ensures consistent performance under moderate radial and axial loads, contributing to the longevity and efficiency of rotating machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling, applying force evenly. 3. Verify the bearing rotates freely by hand after installation; do not force rotation if resistance is felt.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fit, leading to brinelling or damage to raceways. | Utilize a bearing press or hydraulic equipment to apply controlled and even pressure during installation. Ensure proper alignment to prevent cocking. |
| Improper lubrication leading to premature wear. | Apply the recommended lubricant type and quantity as specified for the operating conditions. Ensure the lubricant is compatible with brass. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||