This brass deep groove ball bearing offers exceptional corrosion resistance and thermal conductivity, making it ideal for demanding power transmission applications. Engineered for reliability under various operating conditions.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 26mm |
| Outside Diameter | 155mm |
| Width | 38mm |
Specified by design engineers worldwide, this brass deep groove ball bearing (26mm ID x 155mm OD x 38mm W) delivers robust performance in challenging environments. The inherent properties of brass, including its excellent corrosion resistance to mild chemicals and atmospheric conditions, coupled with superior thermal conductivity, ensure efficient heat dissipation and extended service life. This makes it a prime choice for applications requiring consistent operation and resistance to environmental degradation. Its precision manufacturing guarantees smooth rotation and load-bearing capacity suitable for a wide range of industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing housing and shaft are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the shaft and bearing bore. 3. Carefully press the bearing onto the shaft using a suitable press or arbor, ensuring even pressure distribution on the inner ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring during shaft mounting. | Always apply force to the inner ring when mounting onto the shaft to prevent damage to the bearing raceways. |
| Improper lubrication leading to premature wear. | Use the recommended lubricant type and quantity as per manufacturer specifications and application requirements. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||