This brass deep groove ball bearing (25mm ID x 115mm OD x 23mm W) offers exceptional corrosion resistance and reliable performance. Engineered for efficient power transmission in diverse industrial settings.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 25mm |
| Outside Diameter | 115mm |
| Width | 23mm |
A proven choice for industrial professionals, this deep groove ball bearing is constructed from high-grade brass, ensuring superior corrosion resistance and excellent thermal conductivity, crucial for applications involving moisture or elevated temperatures. With an inside diameter of 25mm, an outside diameter of 115mm, and a width of 23mm, it offers a substantial load-bearing capacity for demanding power transmission duties. The brass material also provides inherent anti-galling properties, reducing wear and extending service life in heavy-duty machinery, agricultural equipment, and general industrial power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Secure the bearing in the housing using appropriate retaining mechanisms.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a contaminated shaft. | Thoroughly clean both the bearing bore and the shaft before installation to prevent damage and ensure smooth seating. |
| Uneven seating of the bearing during press-fit. | Apply even pressure to the outer ring of the bearing during installation to prevent misalignment and potential race damage. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||