Engineered for superior performance, this brass deep groove ball bearing offers exceptional load-bearing capacity and smooth operation. Its robust construction ensures longevity in demanding power transmission systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 91mm |
| Outside Diameter | 172mm |
| Width | 23mm |
A high-performance industrial component, this deep groove ball bearing is precision-manufactured from high-grade brass, offering excellent corrosion resistance and good thermal conductivity. With an inside diameter of 91mm, an outside diameter of 172mm, and a width of 23mm, it is designed to handle significant radial and axial loads. The smooth internal raceways and optimized ball complement minimize friction and heat generation, ensuring efficient power transmission and extended service life in high-speed and heavy-duty applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the shaft and housing bore to remove any debris or contaminants. 2. Gently apply a thin layer of appropriate bearing lubricant to the inner ring and shaft. 3. Carefully mount the bearing onto the shaft, ensuring it is seated squarely and without tilting, using a suitable press or bearing heater if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or into the housing. | Use a bearing press or induction heater for proper, even mounting to avoid damaging the bearing races or balls. |
| Insufficient or improper lubrication. | Ensure the correct type and amount of lubricant is used, and that it is applied evenly to the bearing components before and during operation. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||