This brass deep groove ball bearing offers exceptional load-carrying capacity and low friction for critical power transmission applications. Its robust construction ensures reliable, long-lasting performance in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 23mm |
| Outside Diameter | 76mm |
| Width | 39mm |
Built to exacting engineering tolerances, this brass deep groove ball bearing features an internal diameter of 23mm, an external diameter of 76mm, and a width of 39mm. The premium brass construction provides superior corrosion resistance and excellent thermal conductivity, making it ideal for applications involving moderate shock loads or where non-magnetic properties are beneficial. Its optimized internal geometry minimizes friction and heat generation, ensuring efficient power transfer and extended service life in dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free of debris. 2. Apply a thin, uniform layer of appropriate lubricant to the bearing races. 3. Carefully press or install the bearing into its housing using controlled force and alignment tools.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening during installation, leading to brinelling and premature failure. | Use a controlled press or bearing installation tool, ensuring even pressure is applied to the bearing's outer ring only. |
| Using improper or insufficient lubrication, causing increased friction and wear. | Consult the bearing manufacturer's specifications for the correct lubricant type and quantity for the intended operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||