This brass deep groove ball bearing is engineered for precision power transmission. Its robust construction and corrosion-resistant brass material ensure reliable, low-friction operation in diverse industrial settings.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 23mm |
| Outside Diameter | 62mm |
| Width | 12mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing boasts a 23mm inner diameter, 62mm outer diameter, and a 12mm width. Constructed from high-grade brass, it exhibits superior corrosion resistance, making it ideal for applications exposed to moisture or aggressive media. The bearing's design minimizes friction and noise, ensuring smooth, efficient power transfer. Its tight tolerances and robust ball cage design contribute to extended service life and consistent performance under moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing and mating shaft/housing thoroughly with a lint-free cloth and appropriate solvent. 2. Carefully mount the bearing onto the shaft or into the housing, ensuring even pressure distribution and avoiding impact loads. 3. Verify proper fit and retention; lubricate according to manufacturer specifications before operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or into the housing with excessive force or hammering. | Use a hydraulic press, bearing heater, or a properly sized bearing installer tool to apply even pressure. Never strike the bearing directly. |
| Improper lubrication or using the wrong type of lubricant. | Consult the bearing manufacturer's data sheet for recommended lubricant type and fill quantity. Ensure lubrication is applied before initial operation and maintained as per schedule. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||