This brass deep groove ball bearing is engineered for exceptional performance in high-stress power transmission systems. Its robust construction and premium brass material deliver superior durability and efficient operation under demanding conditions.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 90mm |
| Outside Diameter | 92mm |
| Width | 25mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing features an inside diameter of 90mm, an outside diameter of 92mm, and a width of 25mm. Constructed from high-grade brass, it offers excellent corrosion resistance, good thermal conductivity, and the ability to withstand moderate loads and speeds. The inherent properties of brass contribute to reduced friction and heat generation, enhancing operational efficiency and lifespan in environments prone to moisture or chemical exposure. This bearing is ideal for applications requiring reliability and longevity where standard steel bearings may degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure. 3. Verify free rotation after installation and check for any binding or unusual noise.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation of raceways. | Use a proper bearing press or a controlled hammering technique with a soft-faced mallet, ensuring force is applied to the ring being fitted. |
| Incorrect lubrication, either insufficient or over-lubrication, impacting performance and lifespan. | Consult the bearing manufacturer's specifications for the appropriate lubricant type and quantity based on operating speed and load. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||