Engineered for exceptional performance, this brass deep groove ball bearing offers superior corrosion resistance and reliable operation. Its robust construction ensures smooth power transmission in diverse industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 68mm |
| Outside Diameter | 113mm |
| Width | 43mm |
Specified by design engineers worldwide, this deep groove ball bearing features a precise 68mm inside diameter, a 113mm outside diameter, and a 43mm width. Constructed from high-grade brass, it provides excellent resistance to corrosive environments and non-magnetic properties, making it ideal for applications where traditional steel bearings may fail. The inherent lubricity of brass, combined with controlled internal clearances, ensures minimal friction and extended service life under moderate radial and axial loads. Its design facilitates efficient operation in pumps, mixers, and other power transmission systems exposed to moisture or chemical agents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. Use appropriate lubrication as per application requirements. 2. Carefully press the bearing onto the shaft or into the housing, ensuring even pressure distribution. Avoid hammering directly on the bearing. 3. Verify free rotation of the bearing by hand after installation. Check for any binding or unusual noise.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or premature wear. | Utilize a proper bearing press or induction heater for controlled installation. Never strike the bearing directly. |
| Insufficient or incorrect lubrication, causing increased friction and heat. | Consult lubrication charts for the specific operating conditions and bearing type. Ensure clean and proper application of lubricant. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Chemical processing equipment, Marine propulsion systems, Food and beverage machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||