This brass deep groove ball bearing offers superior corrosion resistance and reliability in power transmission applications. Engineered for demanding industrial environments, it ensures smooth operation and extended service life.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 19mm |
| Outside Diameter | 86mm |
| Width | 30mm |
A proven choice for industrial professionals, this deep groove ball bearing features a 19mm inside diameter, an 86mm outside diameter, and a 30mm width. Constructed from high-quality brass, it provides exceptional corrosion resistance, making it ideal for wet or chemically active environments where traditional steel bearings might degrade. The solid brass construction also offers good thermal conductivity and non-sparking properties, crucial for certain hazardous applications. This bearing's design is optimized for handling moderate radial and axial loads, ensuring efficient and reliable power transfer in a wide array of machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tools and fixtures, ensuring it is seated square. 3. Verify smooth rotation of the bearing after installation before applying operational loads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Use a proper bearing press or a controlled method of heat/cold mounting to avoid damaging the bearing raceways. |
| Insufficient lubrication or using the wrong type of lubricant. | Consult the bearing manufacturer's specifications for recommended lubricants and re-greasing intervals appropriate for the operating environment. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Pumps and Compressors, Conveyor Systems, Electric Motors, Industrial Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||