This brass deep groove ball bearing offers superior corrosion resistance and excellent thermal conductivity for demanding power transmission. Its robust design ensures reliable, low-friction operation under significant radial and axial loads.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 19mm |
| Outside Diameter | 143mm |
| Width | 38mm |
A high-performance industrial component, this deep groove ball bearing features a precise 19mm inside diameter, a substantial 143mm outside diameter, and a 38mm width. Constructed from premium brass, it excels in environments where corrosion resistance and good thermal dissipation are critical. The material's inherent properties contribute to reduced friction and enhanced operational longevity, making it ideal for high-speed, moderate-to-heavy load applications in various industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of debris. 2. Carefully align the bearing with the shaft and housing before insertion. 3. Apply even, controlled pressure to seat the bearing, avoiding excessive force or hammering.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper alignment leading to premature wear. | Always ensure perfect concentricity between the bearing, shaft, and housing during installation. |
| Using incorrect lubrication or insufficient quantity. | Refer to the bearing manufacturer's recommendations for appropriate lubricant type and fill volume. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric motors, Gearboxes, Conveyor systems, Industrial pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||