This brass deep groove ball bearing offers exceptional performance in power transmission applications. Engineered for durability and smooth operation, its robust brass construction ensures longevity even in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 18mm |
| Outside Diameter | 158mm |
| Width | 12mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing features an 18mm inside diameter, a 158mm outside diameter, and a 12mm width. Constructed from high-grade brass, it provides excellent corrosion resistance and moderate load-carrying capacity, making it suitable for applications where non-magnetic properties or electrical insulation are advantageous. The precise internal geometry ensures minimal friction and efficient power transfer, contributing to the overall reliability of driven systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing seat and shaft thoroughly to remove any debris or contaminants. 2. Carefully press or gently tap the bearing onto the shaft or into the housing, ensuring it is seated squarely and without excessive force. 3. Verify free rotation of the bearing after installation to confirm proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when mounting on a shaft. | Always apply mounting force to the inner ring when installing on a shaft to prevent damage to the raceways. |
| Overtightening the bearing in its housing. | Ensure the bearing is seated correctly without being excessively compressed, which can lead to premature wear. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Conveyor Systems, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||