Engineered for exceptional performance, this brass deep groove ball bearing offers superior corrosion resistance and excellent thermal conductivity. Its precise dimensions ensure smooth, low-friction operation in critical power transmission applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 18mm |
| Outside Diameter | 106mm |
| Width | 6mm |
Designed for demanding industrial environments, this brass deep groove ball bearing (18mm ID x 106mm OD x 6mm Width) provides a robust solution for power transmission. The inherent lubricity and corrosion resistance of brass make it ideal for applications where exposure to moisture or mild chemicals is a concern, ensuring extended service life and reliable performance. Its compact design facilitates integration into a wide range of machinery, from conveyor systems to processing equipment. The material's ability to dissipate heat efficiently further contributes to its suitability in high-cycle or moderately loaded scenarios, maintaining operational integrity and minimizing wear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. 3. Secure the bearing in its housing, again ensuring even pressure distribution on the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring during shaft mounting. | Always apply mounting force evenly to the inner ring when fitting the bearing onto the shaft to prevent damage to the raceways and balls. |
| Incorrect shaft or housing fit, leading to premature wear. | Verify that the shaft and housing dimensions conform to the specified tolerances for a snug but not overly tight fit. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Conveyor Systems, Electric Motors, Industrial Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||