This brass deep groove ball bearing offers superior load carrying capacity and reduced friction. Its robust construction ensures reliable performance in high-stress power transmission applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 52mm |
| Outside Diameter | 77mm |
| Width | 32mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 52mm, an outside diameter of 77mm, and a width of 32mm. Constructed from high-grade brass, it provides excellent corrosion resistance and good thermal conductivity, making it ideal for applications exposed to moisture or moderate heat. The precise geometry of the raceways and balls ensures minimal vibration and quiet operation. Its robust design makes it suitable for continuous duty in electric motors, gearboxes, and conveyor systems where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure. 3. Verify proper seating and alignment before engaging the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to deformation of races or balls. | Use a proper bearing press or a carefully selected sleeve to apply even pressure during installation. |
| Installing the bearing in a contaminated environment, introducing dirt and grit. | Maintain a clean work area and keep the bearing in its original packaging until installation. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||