This brass deep groove ball bearing is meticulously crafted for robust power transmission. Its solid brass construction offers superior corrosion resistance and excellent thermal conductivity, ensuring reliable performance under stringent operating conditions.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 47mm |
| Outside Diameter | 140mm |
| Width | 27mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing features a 47mm inside diameter, a 140mm outside diameter, and a 27mm width. The high-quality brass construction provides exceptional resistance to corrosion and chemical attack, making it ideal for environments where traditional steel bearings might degrade. Its robust design ensures efficient load distribution and reduced friction, contributing to extended operational life and minimized downtime in demanding industrial machinery and power transmission systems. The material's inherent properties also aid in heat dissipation, crucial for sustained high-performance operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly before installation. 2. Carefully align the bearing with the shaft and housing to prevent any binding. 3. Apply a light, even pressure to seat the bearing, avoiding impact loads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper alignment during installation. | Ensure precise alignment of the bearing with the shaft and housing before applying pressure to prevent premature wear and damage. |
| Over-greasing or using incorrect lubricant. | Consult the application's lubricant recommendations and apply only the specified amount of the correct lubricant to avoid performance degradation. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Heavy Machinery Drives, Agricultural Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||