This brass deep groove ball bearing offers superior corrosion resistance and excellent electrical conductivity. Engineered for reliable power transmission in challenging industrial settings, it ensures smooth, low-friction operation.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 16mm |
| Outside Diameter | 157mm |
| Width | 40mm |
Manufactured under strict quality controls, this 16mm inside diameter, 157mm outside diameter, and 40mm width deep groove ball bearing is constructed from high-grade brass. This material selection provides exceptional resistance to corrosive environments and offers good thermal and electrical conductivity, making it ideal for applications where these properties are critical. The robust design ensures high load-carrying capacity and extended service life, minimizing downtime and maintenance costs in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even force to the inner ring. 3. Mount the bearing assembly into the housing, ensuring proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply installation force to the inner ring when mounting onto a shaft to prevent brinelling and damage to the raceways. |
| Insufficient lubrication during installation. | Ensure the bearing is adequately lubricated with the specified grease or oil before and during installation as per the application requirements. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Chemical processing equipment, Food and beverage machinery, Marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||