This brass deep groove ball bearing offers superior corrosion resistance and excellent load-bearing capabilities. Precisely engineered for smooth, reliable operation in demanding power transmission applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 15mm |
| Outside Diameter | 119mm |
| Width | 42mm |
Manufactured under strict quality controls, this brass deep groove ball bearing features an inside diameter of 15mm, an outside diameter of 119mm, and a width of 42mm. Constructed from high-grade brass, it exhibits exceptional resistance to corrosive environments and maintains dimensional stability under varying thermal conditions. Its robust design ensures optimal performance and longevity in high-torque power transmission systems, making it suitable for industrial machinery, agricultural equipment, and marine applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner ring for shaft mounting, outer ring for housing mounting). 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fitting. | Always apply force to the inner ring when mounting onto a shaft, and to the outer ring when mounting into a housing. |
| Improper shaft or housing fit, leading to excessive play or binding. | Ensure the shaft and housing dimensions meet the recommended tolerances for the specified bearing fit. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Agricultural Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||