This brass deep groove ball bearing provides exceptional corrosion resistance and smooth operation. With a 14mm bore, 150mm outer diameter, and 14mm width, it's engineered for reliable performance in power transmission systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 14mm |
| Outside Diameter | 150mm |
| Width | 14mm |
Manufactured under strict quality controls, this deep groove ball bearing is constructed from high-grade brass, ensuring superior corrosion resistance and non-magnetic properties. The precise dimensions of a 14mm inside diameter, 150mm outside diameter, and a 14mm width facilitate seamless integration into power transmission assemblies. Its design minimizes friction and wear, delivering efficient rotational performance in environments where chemical exposure or electrical conductivity is a concern. Ideal for machinery operating in humid or corrosive atmospheres.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and shaft/housing thoroughly. 2. Apply a thin layer of appropriate lubricant to the shaft and bearing bore. 3. Carefully press the bearing onto the shaft or into the housing using a suitable press or fixture, ensuring even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Use a bearing press or appropriate tooling to apply force only to the ring being mounted (inner ring on shaft, outer ring in housing). |
| Improper lubrication, either insufficient or using an incompatible lubricant. | Consult the bearing manufacturer's specifications for recommended lubricants and follow the correct lubrication schedule. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Pumps, Conveyor Systems, Marine Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||