This brass deep groove ball bearing offers superior corrosion resistance and excellent thermal conductivity for demanding power transmission applications. Precisely engineered for smooth operation and extended service life.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 23mm |
| Outside Diameter | 126mm |
| Width | 34mm |
Trusted by engineers across multiple sectors, this brass deep groove ball bearing is designed for exceptional performance in challenging environments. Its solid brass construction provides inherent corrosion resistance and superior thermal dissipation compared to steel bearings, making it ideal for applications involving moisture, chemicals, or elevated temperatures. With an inside diameter of 23mm, an outside diameter of 126mm, and a width of 34mm, this bearing is engineered to handle significant radial and axial loads, ensuring reliable operation in pumps, mixers, and other industrial machinery where material compatibility is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating surfaces on both the shaft and housing are clean, free of burrs, and dimensionally accurate to the specified tolerances. 2. Apply a thin, uniform layer of appropriate bearing lubricant to the bearing's raceways and rolling elements. 3. Carefully press or mount the bearing onto the shaft and then into the housing, ensuring even pressure distribution and avoiding any tilting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or impact during mounting, leading to brinelling or damage to the raceways and rolling elements. | Utilize a proper bearing mounting tool or press. Apply force uniformly to the ring being pressed, never through the rolling elements. Gentle tapping with a soft-faced hammer on a sleeve is acceptable for smaller bearings if done with extreme care. |
| Insufficient or incorrect lubrication, leading to premature wear and overheating. | Refer to the lubricant manufacturer's recommendations and the specific operating conditions of the application. Ensure the correct type and quantity of lubricant are used and that re-lubrication intervals are adhered to. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Chemical Processing Equipment, Marine and Offshore Machinery, Food and Beverage Production Lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||