This brass deep groove ball bearing offers exceptional performance in challenging industrial applications. Its robust construction and brass material ensure reliable power transmission with enhanced corrosion resistance and extended service life.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 11mm |
| Outside Diameter | 145mm |
| Width | 30mm |
Designed for demanding industrial environments, this deep groove ball bearing boasts an 11mm inside diameter, a 145mm outside diameter, and a 30mm width. Constructed from high-quality brass, it exhibits excellent resistance to corrosion and chemical attack, making it ideal for environments with moisture or corrosive fluids. The solid brass construction also offers good thermal conductivity, aiding in heat dissipation under heavy loads. This bearing is engineered for smooth, low-friction rotation, ensuring efficient power transmission in a variety of machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating surfaces on the shaft and housing are clean and free from burrs or contaminants. 2. Apply a light coating of appropriate lubricant to the shaft and the inner bore of the bearing. 3. Carefully press the bearing onto the shaft, ensuring it is seated squarely and to the correct depth. Avoid hammering directly on the bearing's outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication or using the wrong type of lubricant. | Always use the lubricant recommended for the specific operating conditions and bearing type. Ensure consistent and adequate lubrication levels. |
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Use a proper press or induction heater for installation. Never strike the bearing directly with a hammer. Ensure even pressure is applied to the inner ring. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: High-speed rotating machinery, Pumps and compressors in corrosive environments, Conveyor systems with exposure to elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||