This brass deep groove ball bearing offers superior corrosion resistance and excellent electrical conductivity, making it ideal for challenging power transmission applications where performance and longevity are paramount.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 38mm |
| Outside Diameter | 50mm |
| Width | 37mm |
Designed for demanding industrial environments, this deep groove ball bearing boasts an inside diameter of 38mm, an outside diameter of 50mm, and a width of 37mm. Constructed from high-grade brass, it provides exceptional resistance to corrosion and chemical degradation, crucial for operation in humid or aggressive atmospheres. The material's inherent properties also contribute to reduced heat generation and improved electrical insulation capabilities. This robust design ensures smooth, low-friction rotation, suitable for continuous operation under moderate to heavy radial and axial loads in various power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. Verify dimensional compatibility. 2. Carefully press the bearing onto the shaft or into the housing using a suitable press or bearing installation tool. Apply force evenly to the outer ring or inner ring respectively, avoiding direct impact. 3. Once seated, confirm the bearing rotates freely without resistance or play. Lubricate according to application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or impact during installation, leading to brinelling or damage to the raceways. | Use a proper bearing press or induction heater for installation. Apply force only to the ring being mounted (inner ring for shaft mounting, outer ring for housing mounting). |
| Insufficient or incorrect lubrication, causing premature wear and heat buildup. | Consult the bearing manufacturer's specifications or application requirements for the appropriate lubricant type, quantity, and re-greasing intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||