This brass deep groove ball bearing is engineered for high-performance power transmission. Its robust construction and precise dimensions ensure smooth operation and longevity in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 28mm |
| Outside Diameter | 24mm |
| Width | 21mm |
Built to exacting engineering tolerances, this deep groove ball bearing features a 28mm inside diameter, a 24mm outside diameter, and a 21mm width. Constructed from high-grade brass, it offers excellent corrosion resistance and good conductivity, making it suitable for environments where these properties are critical. The material's inherent lubricity also contributes to reduced friction and extended bearing life. This bearing is designed to handle moderate radial loads and some axial loads, ensuring efficient power transfer in rotating machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, ensuring even pressure application. 3. Verify smooth rotation without binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to brinelling or damage. | Use a proper bearing installer or press with appropriate tooling to apply even pressure on the correct ring of the bearing. |
| Contaminating the bearing with dirt or debris during handling and installation. | Keep the bearing in its original packaging until immediately before installation. Handle with clean hands or tools. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||