This industrial O-ring, crafted from robust Buna-N with a brass construction, offers superior sealing performance. Its precise dimensions ensure a leak-proof fit in critical fluid and gas systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.517" |
| Outside Diameter | 6.235" |
| Cross Section | 0.263" |
Built to exacting engineering tolerances, this Buna-N O-ring features an Inside Diameter of 6.517 inches, an Outside Diameter of 6.235 inches, and a Cross Section of 0.263 inches. The Buna-N (Nitrile) material provides excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for a wide range of industrial applications. The brass component offers inherent corrosion resistance and can be advantageous in specific environments where non-ferrous materials are specified.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding any twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can nick or cut the O-ring. | Apply gentle pressure and utilize appropriate installation tools if necessary. |
| Installing the O-ring into a contaminated or damaged groove. | Thoroughly inspect and clean the groove before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: Hydraulic systems, Pneumatic systems, Fluid transfer lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||