This industrial O-ring, constructed from robust Aluminum 6061, provides superior sealing in demanding environments. Its precise dimensions ensure leak-proof performance for critical fluid and gas applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.565" |
| Outside Diameter | 9.522" |
| Cross Section | 0.193" |
Specified by design engineers worldwide, this Aluminum 6061 O-ring offers exceptional durability and corrosion resistance, making it ideal for high-pressure and corrosive media applications. With an inside diameter of 6.565 inches, an outside diameter of 9.522 inches, and a precise 0.193-inch cross-section, it guarantees a tight, reliable seal. The inherent strength and thermal conductivity of Aluminum 6061 contribute to its suitability in aerospace, automotive, and chemical processing industries where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully install the O-ring into its designated groove, avoiding stretching or twisting. 3. Apply appropriate lubrication if recommended for the specific application to facilitate proper seating and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening of fasteners, leading to O-ring extrusion or shear. | Adhere to specified torque values and use appropriate tightening sequences. |
| Using an O-ring incompatible with the fluid or operating temperature. | Verify material compatibility with the process media and environmental conditions before selection. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Hydraulic and Pneumatic Systems, Automotive Engine Components, Aerospace Fluid Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||