This deep groove ball bearing, constructed from lightweight 6061 aluminum, offers excellent corrosion resistance and reduced rotational inertia. Ideal for power transmission systems requiring efficient, high-speed operation and reduced load.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 58mm |
| Outside Diameter | 63mm |
| Width | 29mm |
Designed for demanding industrial environments, this deep groove ball bearing features an inside diameter of 58mm, an outside diameter of 63mm, and a width of 29mm. Fabricated from Aluminum 6061, it provides a significant weight reduction compared to steel alternatives, contributing to lower energy consumption and reduced stress on rotating components. Its inherent corrosion resistance makes it suitable for applications exposed to moisture or mild chemicals. This bearing excels in environments where minimal lubrication is preferred or where non-magnetic properties are advantageous.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Gently press the bearing into the housing, applying even force to the outer ring. 3. If pressing onto a shaft, apply force to the inner ring, ensuring the bearing is seated squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation. | When mounting the bearing into a housing, apply force only to the outer ring. When mounting onto a shaft, apply force only to the inner ring. |
| Overheating the bearing during press-fitting. | Avoid excessive heat when press-fitting. If heating is necessary, use a controlled induction heater or oil bath at a temperature not exceeding 120°C (250°F) for aluminum bearings. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: High-speed rotating machinery, Automated manufacturing equipment, Lightweight robotic arm joints.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||