This lightweight, corrosion-resistant deep groove ball bearing, constructed from Aluminum 6061, offers exceptional performance in power transmission applications. Its precise dimensions ensure smooth, low-friction operation.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 34mm |
| Outside Diameter | 25mm |
| Width | 18mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 34mm, an outside diameter of 25mm, and a width of 18mm. Fabricated from Aluminum 6061, it exhibits excellent corrosion resistance, a high strength-to-weight ratio, and good thermal conductivity, making it ideal for environments where traditional steel bearings might degrade or add unnecessary weight. The internal geometry of the deep groove design allows for radial and axial loads, ensuring reliable operation in demanding power transmission systems. Its non-magnetic properties can also be advantageous in specific electronic or sensitive equipment applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free from debris. 2. Carefully press the bearing into its housing, applying even pressure to the outer ring. 3. Verify smooth rotation after installation and before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the inner race during press-fitting. | Always apply force to the component being pressed onto the shaft (inner race) or into the housing (outer race) for the specific installation. |
| Improper lubrication, leading to premature wear. | Consult the bearing manufacturer's specifications for the appropriate lubricant type and re-greasing intervals. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight power transmission assemblies, Corrosion-sensitive machinery, Robotics and automation components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||