This premium deep groove ball bearing, crafted from lightweight yet robust Aluminum 6061, offers exceptional performance in power transmission. Its precise dimensions ensure smooth operation and longevity in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 26mm |
| Outside Diameter | 93mm |
| Width | 16mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 26mm, an outside diameter of 93mm, and a width of 16mm. Constructed from Aluminum 6061, it provides a superior strength-to-weight ratio and excellent corrosion resistance, making it suitable for applications where weight reduction and environmental resilience are critical. The raceway geometry is optimized for high radial and moderate axial loads, ensuring efficient energy transfer and reduced friction in power transmission systems. Its lightweight nature minimizes rotational inertia, contributing to enhanced system responsiveness and energy savings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. Verify dimensional compatibility. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and shaft. Avoid over-lubrication. 3. Carefully press the bearing onto the shaft or into the housing, ensuring it seats squarely and without excessive force. Use a bearing press for optimal results.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling of the raceways. | Utilize a bearing press or a properly sized drift to apply force only to the ring being fitted. Never hammer directly on the bearing. |
| Improper lubrication, either insufficient or using an incompatible lubricant. | Consult the lubricant compatibility chart for Aluminum 6061 bearings and ensure the specified fill level is maintained. Regular re-lubrication is crucial. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motor Shafts, Conveyor Systems, Gearbox Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||