This lightweight Deep Groove Ball Bearing, constructed from corrosion-resistant Aluminum 6061, offers reliable performance in demanding environments. Its precise dimensions ensure smooth operation and reduced friction in power transmission systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 85mm |
| Outside Diameter | 23mm |
| Width | 17mm |
Manufactured under strict quality controls, this deep groove ball bearing features an 85mm inner diameter, a 23mm outer diameter, and a 17mm width. The use of Aluminum 6061 provides excellent corrosion resistance and a significantly lower weight compared to steel bearings, making it ideal for applications where weight reduction is critical. Its robust design handles radial loads effectively, ensuring smooth and efficient power transmission in systems exposed to moisture or corrosive elements. This bearing is engineered for longevity and consistent performance in its designated operating parameters.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully apply a thin layer of appropriate lubricant to the bearing's raceways and the shaft. 3. Gently press the bearing onto the shaft, ensuring it seats squarely. Avoid using excessive force or hammering.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the bearing during installation. | Use a controlled press fit or appropriate bearing installation tool to apply even pressure, avoiding deformation of the bearing rings. |
| Using the wrong type of lubricant for the operating environment. | Consult the bearing's specifications and the application's environmental conditions to select a compatible lubricant that offers adequate protection and longevity. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight industrial machinery, Marine equipment, Food processing machinery, Aerospace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||