Engineered for demanding applications, this Aluminum 6061 deep groove ball bearing offers superior corrosion resistance and reduced weight. Precisely manufactured for smooth, reliable operation in power transmission systems.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 89mm |
| Outside Diameter | 82mm |
| Width | 47mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an 89mm inside diameter, an 82mm outside diameter, and a 47mm width. Constructed from Aluminum 6061, it provides excellent corrosion resistance, making it ideal for environments where traditional steel bearings would degrade. This lightweight alloy also contributes to overall system efficiency and reduced inertia, crucial for high-speed or weight-sensitive power transmission components. Its robust design ensures reliable performance under moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and mounting surfaces thoroughly. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and shaft. 3. Carefully press the bearing onto the shaft, ensuring it seats fully and squarely without excessive force. Use a bearing press or a controlled hammer technique if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Use a proper bearing press or induction heater for controlled mounting. Ensure the shaft and housing bores are within specified tolerances. |
| Contaminating the bearing during installation or operation. | Handle bearings in a clean environment. Ensure seals are intact and appropriate shielding is used for the application to prevent ingress of dirt and moisture. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Corrosive industrial machinery, Aerospace components, Marine equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||