This high-strength Aluminum 6061 U-Bolt is engineered for secure mounting of 4" pipes. Its corrosion-resistant properties and lightweight design make it ideal for various demanding environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 2.63" |
| Inside Length ( B) | 2.39" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-Bolt is fabricated from premium Aluminum 6061-T6 alloy, renowned for its excellent corrosion resistance, weldability, and moderate strength. It is precisely formed to accommodate standard 4" nominal pipe sizes, featuring an inside width (A) of 2.63 inches and an inside length (B) of 2.39 inches. The threaded ends are 1/2"-13 UNC, ensuring compatibility with standard nuts and washers for robust fastening. This material is well-suited for applications where weight is a consideration and exposure to corrosive elements is anticipated.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Place the U-bolt around the 4" pipe, positioning it over the mounting surface. 2. Insert the threaded legs through the designated holes in the mounting bracket or surface. 3. Securely fasten with appropriate nuts and washers, tightening evenly to achieve desired clamping force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening, which can deform the pipe or strip the threads. | Tighten nuts gradually and evenly, using a torque wrench if specified for the application, to achieve a secure fit without excessive force. |
| Using the wrong size U-bolt for the pipe diameter. | Always verify the U-bolt's inside width and length against the pipe's nominal size and the mounting requirements before installation. |
A: This Aluminum 6061 U-Bolt, 4" Pipe is manufactured from Aluminum 6061.
A: Marine hardware and rigging, Plumbing and conduit support, Aerospace and automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||