Engineered from premium Aluminum 6061, this U-bolt provides robust and corrosion-resistant fastening for 2" nominal pipe. Its precise dimensions ensure a secure fit for demanding applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 3.56" |
| Inside Length ( B) | 4.80" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is fabricated from Aluminum 6061, a precipitation-hardening alloy known for its excellent corrosion resistance, moderate strength, and good weldability. Designed to accommodate a 2-inch nominal pipe size, it features an inside width (A) of 3.56 inches and an inside length (B) of 4.80 inches. The threaded ends are precisely machined to a 1/2"-13 UNC thread standard, ensuring compatibility with standard nuts and washers for secure attachment to surfaces or structural members.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe. 2. Place the pipe and U-bolt assembly against the mounting surface, ensuring proper alignment. 3. Secure the U-bolt by threading the provided nuts onto the bolt ends until snug, then tighten evenly to specified torque.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can deform the pipe or U-bolt. | Use a torque wrench to tighten nuts to the manufacturer's recommended specification for the given thread size and material. |
| Using the wrong size U-bolt for the pipe diameter. | Always verify the nominal pipe size and measure the U-bolt's internal dimensions to ensure a proper fit before installation. |
A: This Aluminum 6061 U-Bolt, 2" Pipe is manufactured from Aluminum 6061.
A: Marine applications requiring corrosion resistance, Lightweight structural supports in aerospace, Plumbing and conduit fastening in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||