This Aluminum 6061 U-Bolt is engineered for secure fastening of 2" pipes. Its corrosion-resistant properties and precise dimensions ensure reliable performance in demanding environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 3.15" |
| Inside Length ( B) | 6.51" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this Aluminum 6061 U-Bolt offers superior strength-to-weight ratio, making it ideal for applications where corrosion resistance and reduced load are critical. Manufactured from aircraft-grade 6061 aluminum alloy, it exhibits excellent weldability and machinability, with a typical yield strength of 35,000 psi. The U-bolt features an inside width (A) of 3.15 inches and an inside length (B) of 6.51 inches, accommodating standard 2-inch nominal pipe. The threads are precision-cut to a 1/2"-13 UNC standard, ensuring secure engagement with corresponding nuts (sold separately).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it rests evenly on the mounting surface. 2. Thread the nuts onto the U-bolt legs until snug. 3. Tighten the nuts alternately and evenly to the recommended torque specification for your application, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size U-bolt for the pipe. | Always verify the nominal pipe size and the U-bolt's inside dimensions (A and B) to ensure a proper fit. |
| Overtightening the nuts, leading to deformation of the U-bolt or pipe. | Refer to torque charts or consult an engineer to determine the correct tightening torque for the specific application and material. |
A: This Aluminum 6061 U-Bolt, 2" Pipe is manufactured from Aluminum 6061.
A: Marine hardware and deck fittings, Lightweight structural support in aerospace, Corrosion-resistant pipe clamping in chemical processing, General industrial fastening where weight is a concern.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||