Engineered from high-strength Aluminum 6061, this U-bolt is designed for secure fastening of 1" nominal pipe. Offering superior corrosion resistance, it ensures long-lasting performance in demanding environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 3.66" |
| Inside Length ( B) | 7.15" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is precision-formed from Aluminum 6061, renowned for its excellent strength-to-weight ratio, weldability, and superior corrosion resistance, particularly in marine and chemical applications. It features an inside width (A) of 3.66 inches and an inside length (B) of 7.15 inches, precisely matching the requirements for securing 1" nominal pipe. The threaded ends are a standard 1/2"-13 UNC thread, ensuring compatibility with common hardware and allowing for secure tightening with appropriate nuts and washers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" nominal pipe, ensuring it spans the desired support or mounting surface. 2. Place the pipe and U-bolt assembly onto the mounting surface. 3. Secure the U-bolt by threading the 1/2"-13 nuts onto the bolt ends, tightening evenly on both sides to achieve desired tension and stability.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can deform the pipe or U-bolt. | Tighten nuts until snug and the pipe is held securely, avoiding excessive force. Use a torque wrench if precise specifications are required. |
| Using standard steel washers which can cause galvanic corrosion with aluminum. | Always use washers made from compatible materials such as aluminum, nylon, or neoprene to prevent galvanic corrosion. |
A: This Aluminum 6061 U-Bolt, 1" Pipe is manufactured from Aluminum 6061.
A: Marine hardware mounting, Industrial pipe support, Custom fabrication and bracing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||