This robust Aluminum 6061 U-bolt is engineered for secure mounting of 2" nominal pipe. Its superior corrosion resistance and lightweight design make it ideal for diverse industrial applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.51" |
| Inside Length ( B) | 7.24" |
| Thread Size | 1/2"-13 |
Designed for demanding industrial environments, this U-bolt is fabricated from high-strength Aluminum 6061, renowned for its excellent corrosion resistance and moderate tensile strength. The precise dimensions, including an inside width (A) of 1.51 inches and an inside length (B) of 7.24 inches, ensure a secure and accurate fit for 2" nominal pipe. The 1/2"-13 UNC thread size offers substantial load-bearing capacity and compatibility with standard hardware. This material selection minimizes weight while maintaining structural integrity, crucial for applications where galvanic corrosion is a concern or weight reduction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the curved section conforms to the pipe's outer diameter. 2. Insert the threaded legs through the mounting surface or bracket. 3. Securely fasten with appropriate nuts and washers, tightening evenly to achieve firm clamping without over-stressing the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong U-bolt size for the pipe's nominal diameter. | Always verify the pipe's nominal size and cross-reference with the U-bolt's inside dimensions (A) to ensure a proper fit. Note that nominal pipe size does not directly correspond to its outer diameter. |
| Over-tightening the nuts, leading to deformation of the U-bolt or pipe. | Tighten nuts progressively and evenly. Consult torque specifications if available for the specific application to prevent material damage. |
A: This Aluminum 6061 U-Bolt, 2" Pipe is manufactured from Aluminum 6061.
A: Marine applications (deck and bulkhead mounting), Chemical processing equipment support, Lightweight structural framing and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||