This robust Aluminum 6061 U-Bolt is engineered for secure and corrosion-resistant fastening of 4-inch diameter pipes. Its precise dimensions ensure a reliable hold in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 4.70" |
| Inside Length ( B) | 2.46" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is crafted from high-strength Aluminum 6061, renowned for its excellent corrosion resistance and lightweight properties. The internal dimensions are precisely engineered to accommodate a 4-inch nominal pipe size, with an Inside Width (A) of 4.70 inches and an Inside Length (B) of 2.46 inches. The bolt threads conform to a standard 1/2"-13 UNC specification, ensuring compatibility with standard nuts and washers. This design makes it ideal for applications where weight and environmental resistance are critical factors, such as marine, aerospace, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it rests on a suitable clamping surface. 2. Thread the provided nuts onto the U-bolt legs. 3. Tighten the nuts evenly and securely to achieve the desired clamping force, avoiding over-tightening which could deform the pipe or bolt.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size U-bolt for the pipe diameter. | Always verify the nominal pipe size against the U-bolt's internal dimensions (A and B) before installation. |
| Over-tightening the nuts, leading to material deformation or damage. | Tighten nuts gradually and evenly. Use a torque wrench if specific clamping forces are required and consult material compatibility charts. |
A: This Aluminum 6061 U-Bolt, 4" Pipe is manufactured from Aluminum 6061.
A: Pipe and conduit support in marine environments, Securing structural components in lightweight assemblies, Fastening in corrosive industrial settings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||