Securely fasten 3-inch piping with this robust Aluminum 6061 U-Bolt. Engineered for superior strength and corrosion resistance, it ensures reliable support in demanding environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 2.60" |
| Inside Length ( B) | 5.09" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this U-bolt is fabricated from high-grade Aluminum 6061, renowned for its excellent strength-to-weight ratio and exceptional corrosion resistance. The precise dimensions, with an inside width (A) of 2.60 inches and an inside length (B) of 5.09 inches, are designed to accommodate standard 3-inch nominal pipe sizes securely. The 1/2"-13 UNC thread size ensures compatibility with industry-standard hardware for robust fastening. Ideal for marine, aerospace, and chemical processing applications where lightweight and corrosion-proof solutions are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3-inch pipe, ensuring it rests on a suitable support structure. 2. Thread the nuts onto the U-bolt legs to the desired tightness, ensuring even pressure on both sides. 3. Periodically inspect for tightness and signs of wear, especially in corrosive environments.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can deform the pipe or the U-bolt. | Tighten the nuts until snug, then apply an additional 1/4 to 1/2 turn. Use a torque wrench if precise specifications are available. |
| Using the wrong size U-bolt for the pipe diameter. | Always verify the inside width (A) of the U-bolt against the outside diameter of the pipe being secured. |
A: This Aluminum 6061 U-Bolt, 3" Pipe is manufactured from Aluminum 6061.
A: Pipe and conduit support in marine environments, Securing structural components in aerospace, Chemical processing equipment fastening, General purpose pipe clamping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||