Engineered from high-strength Aluminum 6061, this U-bolt is designed for secure and corrosion-resistant fastening of 2" pipe. Ideal for demanding environments where weight and rust are concerns.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 4.06" |
| Inside Length ( B) | 4.46" |
| Thread Size | 1/2"-13 |
Purpose-built for heavy-duty applications, this U-bolt is fabricated from Aluminum 6061, a T6 temper alloy renowned for its excellent strength-to-weight ratio, corrosion resistance, and weldability. It is specifically designed to accommodate a 2-inch nominal pipe size, featuring an inside width (A) of 4.06 inches and an inside length (B) of 4.46 inches. The threaded ends are precision machined to a 1/2"-13 UNC standard, ensuring robust and reliable engagement with corresponding nuts and washers. Its lightweight yet durable construction makes it an optimal choice for marine environments, chemical processing plants, and other applications requiring resistance to saltwater, chemicals, and atmospheric corrosion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Place the U-bolt around the 2" pipe. 2. Position the pipe and U-bolt against the mounting surface, ensuring proper alignment. 3. Secure the U-bolt by attaching the appropriate nuts and washers to the threaded ends, tightening them evenly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the U-bolt or damage the pipe. | Tighten nuts to the recommended torque specification for Aluminum 6061 hardware or until snug and secure, ensuring even pressure on both sides. |
| Using incorrect size nuts or washers, leading to a loose or insecure connection. | Always use 1/2"-13 UNC nuts and appropriate size washers that fully support the U-bolt legs. |
A: This Aluminum 6061 U-Bolt, 2" Pipe is manufactured from Aluminum 6061.
A: Marine pipe and conduit support, Chemical processing equipment mounting, Lightweight structural bracing in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||