Engineered for critical safety applications, this 0.484" thick Aluminum 6061 stock sheet offers superior strength-to-weight ratio, excellent corrosion resistance, and reliable performance under stress.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.484" |
| Length | 42" |
| Width | 16" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.484 inches, a length of 42 inches, and a width of 16 inches. Manufactured to stringent industry standards, 6061 aluminum is a precipitation-hardened alloy known for its good strength, weldability, and excellent corrosion resistance. Its balanced properties make it a preferred material for structural components, safety barriers, and protective enclosures where durability and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully position the Aluminum 6061 stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and methods as dictated by the application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for the intended shear and tensile loads. | Select high-strength, corrosion-resistant fasteners (e.g., stainless steel or aerospace-grade alloys) that meet or exceed the calculated load requirements for the specific safety application. |
| Inadequate edge preparation leading to stress concentrations. | Smooth and deburr all cut edges to remove sharp corners and potential stress risers, ensuring a more uniform stress distribution across the material. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Protective Machine Guarding, Industrial Safety Barriers, Structural Components for Safety Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||