This robust Aluminum 6061 stock sheet provides superior strength and corrosion resistance, ideal for fabricating durable components in high-pressure pneumatic systems. Precision-engineered for critical applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.871" |
| Length | 24" |
| Width | 14" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet measures 0.871 inches thick, 24 inches long, and 14 inches wide. Aluminum 6061 is a precipitation-hardened alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and weldability. Its machinability allows for intricate component creation essential for pneumatic cylinders, manifolds, and housing units where reliability and performance are paramount. This material conforms to relevant industry standards for structural integrity and material composition, ensuring consistent performance in demanding operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to any fabrication. 2. Utilize appropriate cutting and machining techniques for Aluminum 6061, ensuring proper tool selection to avoid material stress. 3. Integrate fabricated components into the pneumatic system, following established assembly protocols and pressure testing procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners without considering galvanic corrosion potential when mating with Aluminum 6061. | Employ stainless steel fasteners or apply appropriate insulating compounds to prevent galvanic corrosion. |
| Overheating Aluminum 6061 during welding, which can weaken the heat-treated properties. | Employ controlled welding techniques and consider post-weld heat treatment if necessary to restore mechanical properties. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic Cylinder Housings, Air Manifold Blocks, Pneumatic Control Valve Bodies, Custom Pneumatic Actuator Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||