This premium Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to specified dimensions, it's ready for your most demanding fabrication and prototyping projects.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.462" |
| Length | 30" |
| Width | 33" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet is engineered for superior performance. Its nominal dimensions are 0.462 inches (11.73 mm) in thickness, 30 inches (762 mm) in length, and 33 inches (838.2 mm) in width. Composed of a 6061 aluminum alloy, it boasts excellent weldability, formability, and a T6 temper, providing a yield strength of approximately 45 ksi (310 MPa) and an ultimate tensile strength of around 48 ksi (330 MPa). This alloy is renowned for its resistance to stress corrosion cracking and its suitability for applications requiring moderate to high strength.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material certification against project requirements. 2. Clean the sheet surface thoroughly to remove any grease, oil, or debris. 3. Prepare the sheet for cutting, bending, or joining operations according to design specifications and standard metalworking practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using non-industrial grade aluminum for critical structural components. | Always specify and utilize industrial-grade alloys like 6061 for applications demanding reliable mechanical properties and longevity. |
| Failing to account for material springback during bending operations. | Perform test bends on scrap material to accurately determine the required overbend angle, compensating for the inherent springback of Aluminum 6061. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural framework for machinery, Custom tooling and jigs, Prototyping of aerospace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||