This robust Aluminum 6061 stock sheet, precisely manufactured to 0.783" thickness, 44" length, and 18" width, is engineered for demanding fabrication projects requiring superior strength and corrosion resistance.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.783" |
| Length | 44" |
| Width | 18" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet is a widely utilized alloy known for its excellent strength-to-weight ratio, good formability, and superior corrosion resistance. With a precise thickness of 0.783 inches, a length of 44 inches, and a width of 18 inches, it is ideally suited for a broad spectrum of fabricating applications, including structural components, marine hardware, automotive parts, and general manufacturing where moderate to high strength is paramount. Its inherent weldability and machinability facilitate efficient processing and integration into complex designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Measure and mark the sheet accurately according to design specifications. 3. Utilize appropriate cutting tools (e.g., abrasive saw, waterjet) for precise sectioning.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect measurement leading to material waste. | Double-check all measurements before cutting; use a calibrated measuring tape or digital caliper. |
| Using improper cutting tools, causing edge damage or poor finish. | Select cutting tools designed for aluminum to ensure clean cuts and avoid burrs or deformation. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural framing and supports, Custom brackets and fixtures, Marine and automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||