This Aluminum 6061 stock sheet offers superior strength and corrosion resistance, ideal for robust suspending and bracing applications. Its precise dimensions and material properties ensure reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.393" |
| Length | 31" |
| Width | 44" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet is manufactured to exacting standards for critical structural applications. With a nominal thickness of 0.393 inches (10mm), a length of 31 inches (787mm), and a width of 44 inches (1118mm), it provides substantial material for fabricating complex components. Aluminum 6061 is a precipitation-hardened alloy renowned for its excellent strength-to-weight ratio, good weldability, and outstanding corrosion resistance, making it a preferred choice for aerospace, marine, and general industrial fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the application area is clean and free of debris. 2. Precisely cut the Aluminum 6061 sheet to required dimensions using appropriate cutting tools. 3. Secure the sheet using specified fasteners or welding techniques, adhering to structural load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for structural loads. | Always utilize high-strength, corrosion-resistant fasteners (e.g., AN/MS bolts) specifically designed for the intended load capacity. |
| Inadequate edge preparation before welding. | Thoroughly clean and bevel edges to ensure proper weld penetration and joint integrity, minimizing the risk of weld defects. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural bracing in industrial machinery, Support structures for suspended equipment, Custom fabrication for framing and enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||