This premium Aluminum 6061 stock sheet, classified under our Lubricating category, offers exceptional machinability and corrosion resistance. Ideal for applications requiring low friction and wear.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.244" |
| Length | 36" |
| Width | 16" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet (0.244" thickness, 36" length, 16" width) is a T6 tempered alloy known for its excellent strength-to-weight ratio and formability. Its inherent lubricity and resistance to galling make it a preferred material for bearing surfaces, sliding components, and wear plates in machinery and automated systems. Compliant with industry standards for aerospace and general fabrication, it ensures reliable performance in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Position the Aluminum 6061 sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners or bonding agents, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard aluminum for high-wear or low-friction applications. | Select Aluminum 6061 designated for lubricating or wear-resistant applications to ensure optimal performance and longevity. |
| Improper surface preparation before assembly or machining. | Thoroughly clean and degrease all surfaces that will come into contact to prevent contamination and ensure proper adhesion or lubrication. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Bearing surfaces and bushings, Sliding components in automation, Wear plates and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||