This Aluminum 6061 stock sheet offers superior strength-to-weight ratio and excellent corrosion resistance. Precisely manufactured to 0.169" thickness, 19" width, and 26" length, it's ready for your most demanding fabrication projects.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.169" |
| Length | 19" |
| Width | 26" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet exhibits an excellent combination of strength, weldability, and formability. With a nominal thickness of 0.169 inches, a width of 19 inches, and a length of 26 inches, it conforms to stringent industrial standards for its alloy composition and temper. The inherent properties of 6061 aluminum, including its resistance to stress corrosion cracking and its suitability for anodizing, make it a preferred choice for applications requiring durability and a high-quality surface finish.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity prior to cutting. 2. Utilize appropriate cutting tools designed for aluminum. 3. Ensure proper safety protocols are observed during handling and fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to poor edge quality or material damage. | Employ specialized carbide-tipped blades or waterjet cutting for clean, precise edges. |
| Inadequate surface preparation before welding, resulting in porosity or weak joints. | Thoroughly clean the joint area with a degreaser and wire brush to remove oxides and contaminants. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace components, Marine structures, Automotive parts, General fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||