This 0.286" thick Aluminum 6061 stock sheet offers superior strength and corrosion resistance, ideal for fabricating robust and lightweight components in pneumatic systems.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.286" |
| Length | 36" |
| Width | 14" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet measures 0.286 inches in thickness, 36 inches in length, and 14 inches in width. Aluminum 6061 is a precipitation-hardened alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and ease of fabrication. Its mechanical properties make it exceptionally well-suited for structural applications within pneumatic systems, such as housing for cylinders, manifolds, and custom fittings where durability and reduced mass are critical design parameters. The precise dimensions ensure seamless integration into complex assemblies and predictable performance under operational pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify component dimensions against sheet layout for optimal material utilization. 2. Cut sheet to required shapes using appropriate fabrication tools (e.g., waterjet, CNC milling). 3. Deburr all cut edges to ensure smooth surfaces and prevent damage to pneumatic seals.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized material for structural components. | Always confirm the required thickness and strength of Aluminum 6061 based on anticipated pressures and mechanical loads. |
| Failure to properly deburr cut edges. | Thoroughly remove all burrs from cut edges to prevent premature wear or failure of pneumatic seals and O-rings. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom pneumatic cylinder bodies, Manifold blocks for valve actuation, Enclosures for pneumatic control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||