This robust Aluminum 6061 stock sheet provides exceptional strength and corrosion resistance. Precisely manufactured to 0.487" thickness, 44" length, and 32" width, it's engineered for demanding pneumatic system components.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.487" |
| Length | 44" |
| Width | 32" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet offers superior mechanical properties crucial for pneumatic applications. Its 6061 alloy composition provides a balanced combination of strength, formability, and weldability, with an intermediate temper for enhanced structural integrity. The precise dimensions of 0.487" thickness, 44" length, and 32" width ensure consistent material yield and suitability for fabricating critical pneumatic components such as enclosures, manifold blocks, and structural supports where resistance to atmospheric corrosion and moderate pressure is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and quality against specifications. 2. Cut sheet to required component dimensions using appropriate machining methods. 3. Perform necessary surface treatments or finishing operations prior to assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard aluminum alloys for high-pressure pneumatic components. | Always select alloys like 6061, which offer superior strength and pressure resistance suitable for pneumatic systems. |
| Inadequate surface preparation before assembly or welding. | Thoroughly clean and degrease surfaces to ensure proper adhesion or weld integrity, preventing leaks and structural failures. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic Cylinder Components, Manifold Blocks, Pneumatic System Enclosures, Air Preparation Unit Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||