This high-strength Aluminum 6061 stock sheet offers superior corrosion resistance and weldability, making it a prime choice for critical suspending and bracing applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.802" |
| Length | 33" |
| Width | 32" |
Built to exacting engineering tolerances, this 0.802-inch thick Aluminum 6061 stock sheet measures 33 inches in length and 32 inches in width. The T6 temper provides an excellent balance of strength and ductility, with a yield strength typically exceeding 35,000 psi and an ultimate tensile strength around 38,000 psi. This alloy's machinability and resistance to stress corrosion cracking make it ideal for structural components in aerospace, marine, and industrial bracing systems, ensuring long-term performance under demanding conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and pre-drill all mounting holes according to design specifications. 3. Securely fasten the Aluminum 6061 sheet using appropriate fasteners and torque settings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing fasteners, leading to material deformation or stress concentration. | Utilize a calibrated torque wrench and adhere to recommended fastener torque values for Aluminum 6061. |
| Improper surface preparation, resulting in poor adhesion or premature corrosion. | Thoroughly clean and degrease the surface before installation, and consider using an appropriate primer if required. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural bracing in construction, Support frames for industrial equipment, Components for aerospace assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||